Combine cabinet- and base heights correctly

It all depends on the right combination of cabinet and base!
If several freestanding cabinets for different applications are to be placed next to each other, a uniform overall height could be desirable.
With ELSTA Mosdorfer cabinets this can be achieved by choosing the right combination of cabinet and base heights with different cabinet construction heights!

Degree of protection of cabinets

Selection of the appropriate degree of protection for your application
Protection classes as defined by the product standard IEC 61439 for low voltage switchgear and controlgear assemblies.


Selection guide for cable glands

Suitable cable glands must be used to seal cable entries in the distributon cabinet.
Here you will find a comparison table of common screw connection sizes for the cable diameter, as well as the matching hole diameter.

IP protection rating in accordance with IEC 60529

Standardised protection against contact, foreign matter and water
The protection of an enclosure against penetration by foreign matter and water is identified by a letter-number combination. The resulting code defines standardised levels of protection, which are stated as a protection rating.


Explanations of IEC 61439

Explanations of terms, distribution of roles and definition of interfaces
The IEC 61439 series of standards deals with requirements for low-voltage switchgear assemblies and includes all the colloquial “distribution cabinets” from a domestic installation or industrial low-voltage main distribution systems to switching points in the public low-voltage grid.


Strategies against condensation

Special conditions call for special solutions
ELSTA Mosdorfer is one of the pioneers in the field of preventing or minimising condensate in distribution cabinets that stand outdoors to ensure the maximum possible operational reliability and functionality, even under persistently negative outside influences. Find out more!