Polyester pillars - freestanding

• Self-supporting plastic enclosure with press-fitted base
• Plug-in doors or hinged doors with triangular locking mechanism, preparation for cylinder cam lock or for standard commercial built-in half cylinder locks (lever or case lock), depending on the series
• Door opening angle 120° with hinged doors series 300
• Hot-pressed, glass fibre reinforced thermoset composites, based on unsaturated polyester resin, coloured right through and halogen-free
• Attachments and locking system made of halogen-free thermoplastic, partially glass fibre reinforced and coloured right through
• Corrosion-resistant material for all metal parts
• Freestanding installation by embedding the press-fitted base in the soil
• Interior with individual fastening options for strain relief (anchoring rail or angle section), mounting plate or other extensions

• Widths between 202 and 583 mm
• Heights between 1140 and 2010 mm including base
• Depths between 90 and 278 mm
• Not all widths are available in all heights and depths; see product overview

• Colour RAL 7032 with a smooth surface for series SV (small distribution pillars)
• Colour RAL 7035 with ribbed surface for series 300
• Hinged doors with single or double catch (lever lock for one or two profile half cylinders)
• Plug-in doors with triangular locking mechanism or preparation for built-in half cylinder lock or cylinder cam lock
• Base part on the back free for easy cable entry
• Empty or equipped with hard-paper mounting plate
• Delivered completely assembled

• Painted in another RAL colour
• Special coatings for increasing the UV resistance and protection against graffiti
• Door stay
• Equipped with busbar systems with NH switching devices, lighting device, ventilation systems and heating
• Distributors developed to customer specifications

• Product standards IEC / EN 61439, IEC / EN 62208
• Conforms to Low Voltage Directive 2014/35/EU
• RoHS Directive (EU) 2015/863 (extension to directive 2011/65/EU)
• REACH Regulation (EC) no. 1907/2006 - last update see www.elsta.com/downloads

• Protection class IP 44 or IP 54 (optionally in accordance with IEC 61439 or EN 62208)
• Protection class II (EN 61140) when properly installed
• Ambient temperature suitability lower limit -25 °C (-50 °C)¹
• Ambient temperature suitability upper limit / continuous use temperature max. 120 °C
• Volume resistivity 1014 ohm cm (IEC 60093)
• Dielectric strength min. 130 kV/cm (IEC 60243-1)
• Tracking resistance CTI 600 (IEC 60112)
• Protection against mechanical impact IK 10 (IEC / EN 62262)
• Glow wire test 960°C (EN 60695-2-12)
• Flammability HB 40 a, b (EN 60695-11-10)
• Heat distortion temperature of domes and slugs min. 200°C (ISO 75-2 Method A)
• Halogen-free, resistant to termites
• Resistant to oil, 10% solutions of hydrochloric, sulphuric and acetic acids , alcohol, seawater, sodium/potassium chloride, road salt, urine, bituminous materials, acidic and basic reactants in the soil

¹ Fitness for use in low-temperature applications between -25 ° C and -50 ° C achieved by a slipty deviant design.
 Please announce this requirement when ordering.