Polyester cabinets - freestanding (standard cabinets)

• Modular designed, self-supporting plastic enclosure, enabling the replacement of individual cabinet components
• Removable baseboard (connection bar) for easier cable insertion
• Hinged doors with three-point locking and lever lock, prepared for standard commercial built-in half cylinder locks (except F3)
• Door opening angle of 95° or 180°, depending on series
• Hot-pressed, glass fibre reinforced thermoset composites, based on unsaturated polyester resin, coloured right through and halogen-free
• Attachments and locking system of halogen-free thermoplastic, partially glass fibre reinforced and coloured right through
• Corrosion-resistant material for all metal parts
• Freestanding installation on a ground-mounted base or floor-mounted base (distributor connection dimensions in accordance with DIN and ÖNORM)
• M10 threaded inserts in the rear wall for mounting of busbar systems (185 mm), mounting plates and mounting frames. Fixing points based on DIN 43629 / ÖNORM E 4381

• All standard sizes in accordance with DIN 43629 and ÖNORM E 4381 (DIN 00 to DIN 3, ÖNORM F3 to F6) with heights of 850 mm and 1080 mm, and depth of 320 mm
• Widths between 440 and 1445 mm as a single cabinet; other widths when cabinets combined next to each other
• Depths between 200 mm (only F3 / 1) and 635 mm, standard depth 320 mm
• Heights 650 (only F3 / 1), 850, 1080 and 1350 mm as a single cabinet; other heights when cabinets combined one above the other
• Not all widths are available in all heights and depths; see product overview
• Combination of single cabinets next to each other (under a common roof) or one above the other, with a continuous interior or with separately lockable doors

• Colour RAL 7032 with a smooth surface for series F
• Colour RAL 7035 with a ribbed surface for series X
• Hinged doors with single or double catch (lever lock for one or two profile half cylinders)
• Empty or equipped with hard-paper mounting plate
• Delivered completely assembled

• Painted in another RAL colour
• Special coatings to increase the UV resistance and protection against graffiti
• Combination of more than two single cabinets under a common roof
• Base plate
• Wall mounting (see surface-mounted enclosures)
• Doors on both sides
• Operating door (e.g. for traffic light controllers in traffic technology)
• Asymmetrically divided doors (1/3 and 2/3) and separate functional spaces
• Door stay
• Equipped with busbar systems with NH switching devices, lighting device, ventilation systems and heating
• Distributors developed to customer specifications

• Product standards IEC / EN 61439, IEC / EN 62208
• Conforms to Low Voltage Directive 2014/35/EU
• RoHS Directive (EU) 2015/863 (extension to directive 2011/65/EU)
• REACH Regulation (EC) no. 1907/2006 - last update see www.elsta.com/downloads

• Protection class IP 44 or IP 54 (optionally in accordance with IEC 61439 or EN 62208)
• Protection class II (EN 61140) when correctly installed on the base
• Ambient temperature suitability lower limit -25 °C (-50 °C)¹
• Ambient temperature suitability upper limit / continuous use temperature max. 120 °C
• Volume resistivity 10¹⁴ ohm cm (IEC 60093)
• Dielectric strength min. 130 kV/cm (IEC 60243-1)
• Tracking resistance CTI 600 (IEC 60112)
• Protection against mechanical impact IK 10 (IEC / EN 62262)
• Glow wire test 960°C (EN 60695-2-12)
• Flammability HB 40 a, b (EN 60695-11-10)
• Heat distortion temperature of domes and slugs min. 200°C (ISO 75-2 Method A)
• Halogen-free, resistant to termites
• Resistant to oil, 10% solutions of hydrochloric, sulphuric and acetic acids,  alcohol, seawater, sodium chloride or potassium chloride, road salt, urine, bituminous materials, acidic and basic reactants in the soil

¹ Fitness for use in low-temperature applications between -25 ° C and -50 ° C achieved by a slipty deviant design.
 Please announce this requirement when ordering.