Polyester enclosure - flush-mounted

• Self-supporting plastic enclosure, single-shell or modular design, depending on the series
• Plug-in doors or hinged doors with preparation for cylinder cam lock or for customary commercial built-in half cylinder locks (lever or case lock), depending on the series
• Openings for the cable entry via prefabricated openings, sealed by means of protection plugs
• Hot-pressed, glass fibre reinforced thermoset composites, based on unsaturated polyester resin, coloured right through and halogen-free
• Attachments and locking system made of halogen-free thermoplastic, partially glass fibre reinforced and coloured right through
• Corrosion-resistant material for all metal parts
• Flush mounting in the wall; the front edge is flush to the facade
• Interior with individual fastening options for cable clamping rail, mounting plate or other expansions
• M10 threaded inserts in the rear wall for mounting of busbar systems (185 mm), mounting plates and mounting frames for series E (F-type). Fixing points based on DIN 43629 / ÖNORM E 4381

• Standard sizes in accordance with DIN 43629 and ÖNORM E 4380 (DIN 00 to DIN 3, ÖNORM F3 to F6) with heights of 850 mm and 1080 mm
• Widths between 250 and 1115 mm
• Heights between 320 and 1350 mm
• Depths between 130 and 320 mm
• Not all widths are available in all heights and depths; see product overview

• Colour RAL 7032 with a smooth surface
• Plug-in doors or hinged doors (removable without tools) with preparation for cylinder cam lock or for customary commercial built-in half cylinder locks (lever or case lock), depending on the series
• Empty or equipped with hard-paper mounting plate
• Delivered completely assembled

• Painted in another RAL colour
• Special coatings for increasing the UV resistance and protection against graffiti
• Asymmetrically divided doors (1/3 and 2/3) and separate functional spaces
• Door stay
• Equipped with busbar systems with NH switching devices, lighting device, ventilation systems and heating
• Distributors developed to customer specifications

• Product standards IEC / EN 61439, IEC / EN 62208
• Conforms to Low Voltage Directive 2014/35/EU
• RoHS Directive (EU) 2015/863 (extension to directive 2011/65/EU)
• REACH Regulation (EC) no. 1907/2006 - last update see www.elsta.com/downloads

• Protection class IP 44 or IP 54 (optionally in accordance with IEC 61439 or EN 62208)
• Protection class II (EN 61140) when properly installed
• Ambient temperature suitability lower limit -25 °C (-50 °C)¹
• Ambient temperature suitability upper limit / continuous use temperature max. 120 °C
• Volume resistivity 1014 ohm cm (IEC 60093)
• Dielectric strength min. 130 kV/cm (IEC 60243-1)
• Tracking resistance CTI 600 (IEC 60112)
• Protection against mechanical impact IK 10 (IEC / EN 62262)
• glow wire test 960°C (EN 60695-2-12)
• Flammability HB 40 a, b (EN 60695-11-10)
• Heat distortion temperature of domes and slugs min. 200°C (ISO 75-2 Method A)
• Halogen-free, resistant to termites
• Resistant to oil, 10% solutions of hydrochloric, sulphuric and acetic acids, alcohol, seawater, sodium/potassium chloride, road salt, urine, bituminous materials, acidic and basic reactants in the soil

¹ Fitness for use in low-temperature applications between -25 ° C and -50 ° C achieved by a slipty deviant design.
 Please announce this requirement when ordering.